- Nordictrack Treadmill A2550 Manual
- Nordictrack Treadmill A2350 Manual
- Nordictrack A2350 Problems
- Nordictrack A2350 Manual Free Download
26
Remove the three #8 x 3/4' Screws (12) and care-
fully pivot the Hood (61) off.
Locate the Reed Switch (71) and the Magnet (50)
on the left side of the Pulley (51). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet and
the Reed Switch is about 1/8 in. (3 mm). If neces-
sary, loosen the 3/4' Reed Switch Screw (15),
move the Reed Switch slightly, and then retighten
the Screw. Reattach the Hood (not shown), and run
the treadmill for a few minutes to check for a cor-
rect speed reading.
Nordictrack Treadmill A2550 Manual
PROBLEM: The incline of the treadmill does not change correctly
SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-
Read online or download PDF. Page 26 / 36. NordicTrack A2350 NTL07007.2 User Manual. NordicTrack Sports and recreation Manuals Directory ManualsDir.com - online owner manuals. The NordicTrack A2350 PRO is a great choice for a home treadmill, especially if you’re a walker. This model is the improved 2010 version of Nordictrack A2350, an older model we reviewed a couple of years ago. This equipment offers an attractive set of features that make it a notable machine for Nordictrack, and the price talks for itself.
move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline system.
PROBLEM: The walking belt slows when walked on
Nordictrack Treadmill A2350 Manual
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and
UNPLUG
THE POWER CORD. Using the hex key, turn both
rear roller bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walk-
ing belt is properly tightened.
c. If the walking belt still slows when walked on, see the front cover of this manual.
Top
View
50
15
71
1/8 in.
51
Rear Roller Bolts
2–3 in.
b
61
12
Nordictrack A2350 Problems
