- Chicago Electric Welding Helmet Battery
- Chicago Electric Welding Helmet 61611 Manual
- Chicago Electric Welding Helmet User Manual
- Chicago Welding Helmet Parts
- Chicago Electric Welding Helmet 46092
Chicago Electric Welding Helmet Battery
Deep Sea Solar Powered Auto Darkening Welding Helmet is also one of the best welding helmets under $100. It is best used for MIG, TIG, Arc and grinding applications. It has also earned the 1/1/1/2 rating and it is available in up to 16 shades which are more than enough to provide protection against IR. Chicago Electric Welding Systems 170 Amp is a light welder for beginners and home users. It gives a smooth arc and good penetration when combined with right sized wire and gas. It can weld 3/16' tubes or 1/4' steel plates easily. With 10lb wire spool setting, you.
Page 7
For technical questions, please call 1-800-444-3353.
Item 67854
Adjusting Headband
Adjust the Headband so that the helmet
is seated securely on your head as low
Chicago Electric Welding Helmet 61611 Manual
as possible and close to your face.
Adjust the Headband width by turning the
Ratcheting Headband Knob to make sure the
Front Cover Lens is aligned with your eyes.
Adjust the Headband height by tightening or loosening
the top strap until the Helmet fits snug on your head.
Once the Headband is properly adjusted, lower the
Helmet over your face until the proper angle is found.
Then turn the Tension Adjustment Knobs on either side
of the helmet, locking the helmet’s angle in place.
Block
Nut
(9)
Headband
strap
adjuster
Top
Strap
Figure C
Time Delay and Sensitivity
At the moment the welding operation is started, the
filter screen automatically changes from clear to dark.
The operator can vary the amount of time it takes
the filter to return to a clear state and the sensitivity
of the sensor using the controls inside the helmet.
The Sensitivity setting changes the amount
of light needed to make the filter react.
Dark to Clear Adjustment Switch
Adjusts the speed the lens changes.
In FAST position: .25 - .45 seconds
In SLOW position: .65 - .80 seconds
SENSITIVITY
LOW
HIGH
DELAY TIME
SLOW
<
<
>
>
Chicago Electric Welding Helmet User Manual
FAST
ANSI Z87.1-2003 Variable Shade 4/9-13 SKU 67854
Sensitivity Adjustment Switch
Adjusts the amount of light needed
to activate the lens to darken
Figure D
Solar Cells
This Welding Helmet utilizes high performance solar
cells as power supply, and has two built-in 3V lithium
batteries as power backup. No change of battery is
needed. Under normal welding conditions, users can
expect a battery lifetime of more than 6 years.
Shades
User-selectable variable shades from 9 to 13 are
adjusted at the turn of a shade knob (shade variable).
This product is in full conformity with related DIN, ISO,
EN379 safety standards and ANSI Z87.1-2003 standard.
Filters
The ultra high performance of UV and IR Auto-
Darkening filters provides to user’s eyes and face
full protection against UV and IR radiation during
entire welding process, even in clear state. The UV/
IR protection level is up to shade 16 at all times.
Magnifying Cheater Lens
A Cheater Lens (sold separately) can be attached to
the inside of the helmet by unhooking the wire bar at
the bottom of the Inside Lens Cover, sliding the Cheater
Lens in place, then securing it with the wire bar.
Figure E
SAFETY
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
Page 6
For technical questions, please call 1-800-444-3353. Auto-darkening
Welding Helmet
pRODUcT FEATURES/
OpERATION
At the moment the welding operation
is started, the filter screen automatically
changes from clear to dark in only
1/25,000th of a second.
Dark to clear delay adjustment:
Operator can vary the time for the filter to
return to clear state. At the moment welding
is stopped, the filter screen automatically
changes from dark to clear state according
to the time setting you select.
Switch Sensitivity Adjustment: The
operator can adjust the amount of light
needed to cause the Lens to darken.
This Welding Helmet utilizes high
performance solar cells as power supply,
and has built-in battery(ies) as power
backup, see below. Under normal welding
conditions, users can expect a battery
lifetime of more than 6 years.
User-selectable variable shades from
9 to 13 are adjusted at the turn of a shade
knob (shade variable). This product is in
full conformity with related DIN, ISO, EN379
safety standards and ANSI Z87.1-2003
standard.
Auto-darkening filters provide
protection against UV and IR radiation to the
user’s eyes and face, even in the clear state.
SKU 91214
DELAY TIME
SENSITIVITY
LOW
HIGH
SLOW
FAST
ANSI Z87.1-2003
CSA Z94.3
Variable Shade 4/9-13
(View from
inside of
helmet.)
Dark to clear Delay Adjustment
Chicago Welding Helmet Parts
In FAST Position = .25-.35 Second
In SLOW Position = .50-.80 Second
Switch Sensitivity Adjustment
Adjusts the amount of light the lens
requires to respond and darken with.
These models include built-in batteries. Battery removal/replacement is not possible.
Models 91212 & 91214
(View from
inside of
helmet.)
Sensitivity Adjustment
Adjusts the amount of light the lens
requires to respond and darken with.
Dark to clear Delay Adjustment
Adjusts the amount of time until the
lens turns back to clear.
These models include one built-in 3V CR2450 battery.
Low Battery Light will illuminate when replacement is needed.
Models 94336 & 94337
battery
cover
Low
battery
Light